
****************************************************************************
*                                                                          *
*                         The Ethernet Adapter                             *
*                                                                          *
*                  ODI Driver for NetWare 3.11 Servers                     *
*                                                                          *
*                               Ver. 2.00                                  *
*                                                                          *
*                              README file                                 **                                                                          *
****************************************************************************

1. Introduction

   The Ethernet Adapter ODI Driver for NetWare 3.11 Server conforms to Novell
   NetWare 386 public domain Open Data-Link Interface (ODI), a specification
   jointly designed by Novell and Apple.  It is applied for NetWare 3.11 ser-
   vers.


2. Contents of the Subdirectory

      RETH.LAN      NetWare 3.11 ODI Server Driver for the Ethernet Card.


3. Installation

   1) Install and configure the Ethernet card on your ISA PC system, fol-
      lowing the procedure in your jumperless Ethernet installation manual.

   2) Install NetWare 3.11 Server according to the manual.

   3) Insert the Distribution Diskette into drive A: (or drive B. If drive
      B is your option, replace A: with B: in the following procedure).

   4) At the DOS prompt, type the following commands:

            CD \NETWARE
            SERVER

   5) On the server console, load RETH.LAN.  You may specify the frame type
      and the slot number. For example:

       LOAD A:\NETWARE\ODI\SVRODI\ODIV2\RETH.LAN FRAME=Ethernet_802.3

   6) Bind IPX to RETH by typing the following command:

               BIND IPX RETH

   7) If you want to load RETH.LAN from the hard disk directly in the future,
      setup a workstation to connect to this server, then copy RETH.LAN from
      the Distribution Diskette to the subdirectory SYS:\SYSTEM on the server.

